STEELVANA SIZE GUIDE

Table Base Size Guide

Choosing the right table base is about more than matching dimensions. Tabletop size, material, thickness, base structure, seating clearance, and intended use all affect the final result.

Use this guide as a starting point when selecting a STEELVANA table base. For model-specific dimensions, recommended tabletop sizes, and load information, always refer to the individual product page.

01 · TABLE HEIGHT

Start With the Finished Table Height

Start with the height of the finished table, not the base height alone.

Finished Table Height = Base Height + Tabletop Thickness

Most STEELVANA dining, conference, meeting, and office table bases are approximately 28.3–30 inches high before the tabletop is added.

Many STEELVANA console bases are approximately 32–35 inches high before the tabletop is added.

Always add the thickness of your tabletop to the listed base height when determining the finished table height.

Important: The height shown on a STEELVANA product page refers to the base itself unless otherwise stated.

02 · STABILITY

Stability & Base Proportion

A table base should provide enough footprint and support area to keep the finished table stable while remaining visually proportionate to the tabletop.

There is no single base-to-tabletop proportion that applies to every STEELVANA design.

The appropriate base footprint and support area depend on:

  • Tabletop material and weight
  • Tabletop shape and dimensions
  • Base design and geometry
  • Base height
  • Intended use
  • Whether the table uses paired legs, a full base, or a centered pedestal

Heavier, larger, or more fragile tabletops generally require more support than lighter tabletops of the same size.

Always refer to the dimensions and model-specific tabletop guidance provided on the individual product page.

03 · PAIRED LEGS

Pair of Table Legs

Paired table legs are well suited to rectangular and oval tabletops used for dining tables, conference tables, meeting tables, and office desks.

  • Tabletop WidthEach leg should sit comfortably within the tabletop width while providing adequate support.
  • Leg SpacingThe distance between the two legs affects stability, end overhang, seating positions, and legroom.
  • End OverhangWhen both legs are positioned symmetrically, end overhang can be estimated as:End Overhang = (Tabletop Length − Outer Support Span) ÷ 2
  • Seating ClearanceDo not position the legs so close to the table ends that they interfere with end seating.

For very long or heavy tabletops, a support frame or additional structural support may be appropriate depending on the tabletop material and project requirements.

04 · CENTERED BASES

Full & Round Table Bases

A Full / One-Piece Table Base

A full or one-piece base creates a more continuous support zone than two completely independent legs.

When choosing a full base, consider:

  • Overall base footprint
  • Tabletop length and width
  • Tabletop material and weight
  • Support area
  • Chair and leg clearance

A larger base can provide more support, but it should not extend so far into the seating area that it interferes with knees, feet, or chair placement.

A Round / Center Table Base

A centered pedestal base is ideal for many round dining, meeting, and conversation tables because it allows more flexible seating around the tabletop.

When selecting a round base, consider:

  • Tabletop diameter
  • Base footprint
  • Tabletop material
  • Tabletop weight
  • Overhang
  • Intended use

Round-table compatibility depends on the specific base footprint, tabletop diameter, tabletop material, weight, and intended use.

A larger or heavier tabletop may require a wider or more substantial base, but there is no single footprint ratio that applies to every STEELVANA round base.

Always follow the model-specific recommended tabletop size and dimensions where provided.

05 · CONSOLE BASES

Console Table Bases

Console tables have a different proportion from dining tables. They are typically longer, narrower, and taller.

Many STEELVANA console bases are approximately 32–35 inches high before the tabletop is added.

When choosing a console base, consider:

  • Tabletop length
  • Tabletop depth
  • Finished console height
  • Base width
  • Base depth
  • Tabletop material
  • Whether the console will stand freely or sit against a wall

A narrow tabletop does not mean the base should be excessively narrow.

The base still needs enough footprint to provide stability and remain visually proportionate to the tabletop.

For freestanding consoles, stability and base depth deserve particular attention.

06 · MATERIAL & SUPPORT

Tabletop Materials & Support

Different tabletop materials have different support and installation requirements.

Wood Tabletops

Solid wood and engineered wood tabletops are generally suitable for direct fastening where the tabletop and mounting structure allow.

Always use appropriate fasteners for the specific tabletop material.

Stone / Marble / Quartz

Stone tabletops are heavy and comparatively brittle, so they require more even support and careful load distribution.

For fragile tabletops over 63 in (160 cm), including marble, quartz, and other stone surfaces, we recommend using a wood backing panel or an optional steel support frame to distribute the load more evenly.

Glass & Other Fragile Tops

Glass support requirements depend on the glass thickness, size, mounting method, and the glass fabricator’s recommendations.

Because glass support requirements vary by thickness, size, and mounting method, we do not recommend a universal overhang allowance for all glass tabletops.

Important Note: Large, heavy, or fragile tabletops may require additional support depending on the base design and tabletop configuration. Load capacity varies by model. Always refer to the individual product page for model-specific load information.

NEED HELP CHOOSING?

Not Sure Which Size Is Right?

Send us your tabletop dimensions, material, thickness, and intended use. We can help review which STEELVANA base size or configuration may be suitable for your project.

CONTACT STEELVANA